高壓共軌噴油器適配器測試：
● 可測6路電磁閥噴油器
■ 高電壓 – 博世、電裝噴油器
■ 低電壓 – 德?tīng)柛娪推?nbsp;
● 可測1路西門子、博世壓電晶體（PIEZO）噴油器
● 所有通道電磁閥和壓電晶體驅動具備短路保護功能，不會損害待測噴油器和測試儀本身
● 提供標準測試步驟和工況，標準噴油量/回油量數據，同步顯示。用戶也可十分方便的自定工況，可檢測歐四壓電式高壓共軌噴油器，鄒凡強 13854822395 高壓共軌噴油器試驗臺 共軌油嘴夾具 油嘴專用拆裝工具生產廠家。添加或更改實驗數據,系統帶有400多條標準數據，方便用戶維修噴油器。 共軌泵測試：
● 多通道PWM（脈寬調制信號）輸出用于驅動各種泵
■ 單通道驅動信號的油泵調節
◆ 博世 CP1/CP2/CP3
◆ 德?tīng)柛?CRSP
◆ 電裝 HP3/HP4 15KW標準功率 帶有 DRV閥 測試泵流量
■ 驅動1路DRV，專門用于測試泵的泵油能力
● 單獨兩路驅動結合電裝HP0泵（ECD-U2）上轉速傳感器的正時信號，同步控制HP0泵的兩個油量控制電磁閥
● 所有通道驅動具備短路保護功能，不會損害待測油泵和測試儀本身
● 提供標準測試步驟和工況，標準泵油量數據，同步顯示。用戶也可十分方便的自定工況，添加或更改實驗數據
高壓油軌：
● 提供博世、德?tīng)柛！㈦娧b油軌壓力傳感器的預先標定值
● 用戶可添加新的油泵傳感器類型，并可對不同傳感器壓力顯示值進行再校準
● 自動軌壓控制調節
● 軌壓過高后自動保護
High pressure common rail injector adapter test:
● 6-way solenoid valve injector can be tested
■ high voltage – Bosch, electric injector
■ low voltage – Delphi injector
● it can measure 1-way Siemens, Bosch piezoelectric crystal (piezo) injector
● all channel solenoid valves and piezoelectric crystal drives have short-circuit protection function, which will not damage the injector to be tested and the tester itself
● provide standard test steps and working conditions, standard injection quantity / return quantity data, and display synchronously. Users can also easily set their own working conditions, and can detect Euro 4 piezoelectric high-pressure common rail injector, Zou Fanqiang 13854822395 high-pressure common rail injector test bench common rail nozzle fixture, manufacturer of special disassembly and assembly tools for nozzles. Add or change the experimental data, and the system has more than 400 standard data, which is convenient for users to repair the fuel injector. Common rail pump test:
● multi channel PWM (pulse width modulation signal) output is used to drive various pumps
■ oil pump regulation of single channel drive signal
◆ Bosch cp1/cp2/cp3
◆ Delphi CRSP
◆ electric hp3/hp4 15kw standard power with DRV valve to test pump flow
■ drive 1-way DRV, which is specially used to test the oil pumping capacity of the pump
● two separate drives, combined with the timing signal of the speed sensor on the electric hp0 pump (ECD-U2), synchronously control the two oil volume control solenoid valves of the hp0 pump
● all channel drives have short-circuit protection function, which will not damage the oil pump to be tested and the tester itself
● provide standard test steps and working conditions, standard pump oil volume data, and synchronous display. Users can also easily customize the working conditions, add or change the experimental data
High pressure fuel rail:
● provide pre calibrated values of Bosch, Delphi and electric rail pressure sensors
● users can add new oil pump sensor types and recalibrate the pressure display values of different sensors
● automatic rail pressure control adjustment
● automatic protection after rail pressure is too high
英文由百度翻譯，僅供參考。
